Explore Our Products

UAV and FPV electronics flight controller ESC manufacturer RONGHE
UAV & FPV Electronics
Robotics and motor control board PCBA manufacturer RONGHE
Robotics & Motor Control
Smart home and IoT control board manufacturer RONGHE
Smart Home & IoT Control
Industrial control board and embedded PCBA manufacturer RONGHE
Industrial Control Boards
Power and energy control board BMS inverter PCBA manufacturer RONGHE
Power & Energy Control
Custom PCB and PCBA Manufacturing / PCBA Manufacturing Services
Custom PCB & PCBA

RONGHE H743 Flight Controller 50A Stack STM32H743 MCU Dual IMU 512MB Blackbox for Professional UAVs

The H743 50A Flight Controller Stack is custom-engineered for professional FPV, long-range cinematic, and industrial UAV applications. Powered by the STM32H743 MCU with an extreme 480MHz clock speed and a dual independent IMU architecture, it delivers unparalleled flight stability and ultra-low latency control. Featuring a massive 512MB onboard Blackbox and direct plug-and-play support for mainstream HD VTX systems, this stack ensures maximum reliability and simplified builds for high-end UAVs.
View More

RONGHE F722 Flight Controller STM32F722RET6, 128MB Blackbox Plug-and-Play for 7" Long Range FPV

The RONGHE F722 Flight Controller is a premium FC engineered specifically for 7-inch long-range FPV drones, cinematic rigs, and professional freestyle builds. Powered by the high-speed STM32F722RET6 MCU (216MHz) and an ultra-precise ICM42688P gyro, it guarantees rock-solid stability and fast processing.
View More

RONGHE F405 V4 60A Flight Controller Stack with 4-in-1 ESC | 3-6S, Plug & Play for FPV Racing & Freestyle

The RONGHE F405 V4 60A Stack is a high-performance flight controller system engineered for FPV racing, freestyle, and long-range drones. Combining a powerful STM32F405 MCU with a robust 60A 8-Bit 4-in-1 ESC, it delivers unmatched reliability and precise control. Featuring seamless Plug & Play compatibility and 3-6S LiPo support, this stack simplifies complex builds while maximizing flight stability and explosive power output for both drone enthusiasts and professional pilots.
View More

RONGHE ELRS 2.4GHz Receiver PCBA with ESP8285 and SX1281

Printed circuit board assembly with an RF connector, a green LED and a tactile pushbutton. The listed configuration includes four integrated circuits and two passive crystals.
View More

RONGHE High Quality 2004-1600KV Brushless Outrunner Motor — 20×4mm Stator for 2–3 Inch Micro Multirotors

The RONGHE 2004-1600KV is a brushless outrunner (BLDC) for 2–3 inch micro multirotors and DIY platforms. The 20×4mm stator and 1600KV winding sit below the main 2004 series options at 3000/4000/5000KV (each on its own product page). Typical pairing for the 2004 stator: 2–3 inch props, 2S–4S LiPo, 12–25A class ESC. One bench log (~15.0 V, prop not recorded, 2025/9/2) shows 118 g at 50% throttle and 349 g at 100% in a short scan—not a prop-specific or continuous rating.
View More

RONGHE 2807-1300KV Brushless Outrunner Motor 2807 Stator for 5-7 Inch FPV Long Range Multirotor Endurance Flight Applications

The RONGHE 2807-1300KV is a brushless outrunner (BLDC) for 5–7 inch long-range FPV and multirotor builds. The 2807 stator (28 mm diameter, 7 mm height) and 1300KV rating match the main 2807 series KV line. Typical pairing for this stator class: 5–7 inch props, 4S–6S LiPo, and a 35–60A class ESC. Bench data (7035R prop, ~25 V, 2026/4/23): 820 g at 50% throttle; 2292 g at 100% in a short scan—not a continuous rating. Optical vs commutation RPM diverge from ~60% throttle; speed and efficiency are n
View More

RONGHE 3115-900KV Brushless Outrunner Motor 3115 Stator for 8-12 Inch Industrial Payload UAV Multirotor Platforms Built for Agriculture Inspection and Heavy Lift Flight

The RONGHE 3115-900KV is a brushless outrunner (BLDC) for 8–12 inch industrial and payload UAV multirotors. The 3115 stator (31 mm diameter, 15 mm height) and 900KV rating align with the main 3115 series KV line for heavy-lift and endurance-focused platforms. Typical pairing: 8–12 inch props, 6S–12S LiPo, and a 60–100A class ESC. Bench data (10X5X3R prop, ~25 V, 2026/7/7): 1643 g at 50% throttle; 4135 g at 100% in a short scan—not a continuous rating.
View More

RONGHE 4218-330KV Brushless Outrunner Motor 4218 Stator for 12-18 Inch Large Industrial Multirotor Payload UAV Agriculture Survey and Heavy Lift Flight

The RONGHE 4218-330KV is a brushless outrunner (BLDC) for 12–18 inch large industrial and payload UAV multirotors. The 4218 stator (42 mm diameter, 18 mm height) and 330KV winding sit below the main 4218 series options at 400/500/650KV (separate product pages). Typical pairing: 12–18 inch props, 6S–14S LiPo, and an 80–120A class ESC.
View More

RONGHE X8F21 Intelligent Power Control PCBA Module | AC-DC Isolated Power & Wireless RF Terminal for Smart Devices & UAVs

The X8F21 Intelligent Power Control PCBA is a highly integrated module combining high-efficiency AC-DC isolated power conversion with a robust wireless RF terminal architecture. Engineered for smart home appliances, industrial automation, and professional UAV data links, it features advanced multi-protection systems (surge, over-voltage, short-circuit) and premium industrial-grade components. With its high-performance MCU and optimized low-power design, the X8F21 guarantees extremely safe,
View More

RONGHE Dual-Band Wi-Fi Repeater PCBA | Custom Wireless Networking PCB Assembly

The 1200A-REPEATER-V1 is a printed circuit board assembly for Wi-Fi repeater and wireless networking designs, with RJ45 connectors and labeled RF circuit areas.
View More

RONGHE G-TD602 V1.1 TV Multimedia Mainboard PCBA with USB Type-A and VGA Connectors

The G-TD602 V1.1 is a multimedia mainboard PCBA for television equipment. The board measures 162.4 × 61.2 mm and features a USB Type-A connector, a VGA connector, an HDMI-type connector, a card slot and internal headers.
View More

RONGHE High-Performance DSP Architecture DM6437 Embedded Vision Processing PCBA Board

The RONGHE DM6437 Embedded Vision PCBA is a premier industrial processing board engineered for real-time video analytics and edge AI applications. Driven by the robust TMS320DM6437 DSP architecture, it delivers exceptional computational power for complex imaging tasks. Featuring a high-throughput memory subsystem and multi-channel video capture capabilities, this highly integrated board is the ultimate core for automated optical inspection (AOI), smart security cameras, and industrial robotics.
View More

Industrial MDVR PCBA Main Board - Hi3521 Multi-Channel Video Processing & Surveillance Platform

The RONGHE Industrial MDVR PCBA is a robust video processing platform powered by the high-performance Hi3521 SoC. Designed specifically for extreme environments, it offers seamless H.265 multi-channel recording, 9V-36V wide voltage input, and exceptional -40°C to +85°C temperature tolerance. This board is your ultimate solution for reliable mobile DVRs, fleet management, and heavy-duty industrial surveillance, ensuring rock-solid stability where standard commercial hardware fails.
View More

RONGHE RH-6202-0 Compact Industrial Control Module PCBA High Precision Sensor and Robotics Controller Board

The RONGHE RH 6202 0 is an ultra-compact industrial control and sensor acquisition PCBA board engineered for high-precision telemetry and robotic control. Measuring just 35.0 x 60.0 mm, it integrates advanced signal conditioning, high-speed logic processing, optical isolation, and multi-bus connectivity. Delivering robust computing power with low power draw, it ensures dependable real-time control from -40°C to +85°C across automated manufacturing, autonomous robots.
View More

RONGHE 1000W Power Inverter Control Board PCBA | Intelligent MCU & High-Efficiency DC-AC Conversion

The RONGHE 1000W Power Inverter PCBA (ADX-1000W-NCX001) is a high-efficiency DC-to-AC control board engineered for robust energy conversion. Driven by an advanced intelligent MCU, it ensures a highly stable and pure power output that safeguards sensitive electronics. Designed for seamless integration into off-grid and backup power solutions, this motherboard maximizes energy utilization while offering comprehensive EMI filtering and multi-stage voltage protection.
View More

RONGHE RF2519 230M 230MHz 25W High Power UAV RF Data Link PCBA Module Long Range Industrial Transceiver Board

The RONGHE RF2519 230M is an industrial-grade 230MHz 25W high-power RF transceiver PCBA engineered for mission-critical long-range data links. Built around an ARM Cortex-M3 core, high-linearity power amplifier, and advanced sub-GHz RF transceiver, it delivers reliable bidirectional telemetry exceeding 100km. Featuring exceptional receiver sensitivity, low-phase-noise clocking, and multi-bus support, it maintains rock-solid communication across -40°C to +85°C for leading industrial drones and rob
View More

RONGHE Printed Circuit Board Assembly (PCBA) with USB Type-C Connector

This is a printed circuit board assembly with a USB Type-C connector, a slide switch, and labeled connection points.
View More
SMT PCB Assembly and PCBA Manufacturing Line
ABOUT US

Shenzhen Ronghe Electronics Co., Ltd.

The EMS Division operates under Ronghe Electronics, specializing in the custom manufacturing of PCBA control boards. We focus on three cutting-edge sectors: joint control systems for AI-powered embodied robots, drone flight control systems, and smart home control systems. Leveraging our core manufacturing capabilities, we provide comprehensive, one-stop services—ranging from solution design, PCB layout, and component sourcing to SMT/DIP assembly and testing, through to final system integration and delivery.

Professional Team

Driven by Engineering. Built on Quality. RONGHE brings together experienced engineers, production specialists and quality professionals, working closely from design to mass production to deliver reliable and efficient electronic solutions.
Doris Deng – RONGHE Power Electronics and BMS PCBA Project Specialist

Doris Deng

SMT Assembly · ODM Solutions·BMS · Inverter Control · Power Electronics · Smart Home
Doris specializes in custom PCBA control boards and SMT assembly for a wide range of electrical appliances and electronic products. We support international OEM/ODM customers with tailored solutions, from technical consultation and component sourcing to prototyping, manufacturing, and quality testing. Committed to reliable quality and flexible customization, we help turn your ideas into market-ready products.
Start Consultation
Lisa Vey – Head of Global PCBA Business and Primary International Business Contact at RONGHE

Lisa Vey

Head of Global PCBA Business | International B2B Partnerships

Focused on global OEM/ODM partnerships and customized embedded control board projects for industrial equipment, smart devices, automation, and electronic systems. Lisa leads international business development and coordinates customer requirements, hardware, firmware, prototyping, and production with RONGHE's technical team.
Start Consultation
Wayne Lee – Robotics and Motor Control PCBA Specialist at RONGHE

Wayne Lee

Robotics · Motor Control · Automation
Focused on custom control board solutions for robotics, robotic joints, BLDC/PMSM motors, actuators, and intelligent automation systems. Wayne works closely with international OEM customers and RONGHE's engineering team to develop reliable motor control and embedded hardware solutions from prototyping to production.
Start Consultation
Jessica-RONGHE PCB and PCBA Engineering Team

Jessica Chen

MCU · FPV · Embedded Systems · Industrial Control
Specialized in custom PCB assembly for MCU-based embedded systems, FPV controllers, and industrial control applications. Jessica coordinates international OEM projects with RONGHE's engineering and manufacturing teams, supporting component sourcing, SMT assembly, functional testing, and production from prototype to mass manufacturing.
Start Consultation
Lydia Meng – RONGHE Custom PCB Assembly and SMT Manufacturing Project Specialist

Lydia Meng

PCB Assembly · SMT Manufacturing · OEM PCBA · Mass
Production
Specialized in international OEM PCB assembly and custom PCBA manufacturing projects. Lydia works with overseas customers and RONGHE s engineering team to coordinate Gerber and BOM reviews, component sourcing, manufacturing quotations, SMT and through-hole assembly, functional testing, and production delivery from prototype to mass production.
Start Consultation

Core Technologies That Drive

From precision agriculture to emergency response and professional cinematography, drones are transforming the way industries operate.RONGHE provides reliable flight controllers, ESCs and customized PCBA solutions engineered for stable flight, precise control and demanding real-world applications.
Agriculture
Enabling precision spraying, crop monitoring and efficient farm management through reliable UAV control systems.
Security Emergency Response
Supporting aerial inspection, search and rescue, disaster assessment and rapid situational awareness in challenging environments. Cinematography
Delivering stable, responsive flight control for professional aerial filming, dynamic tracking and high-quality cinematic production.
UAV Electronics and Flight Controller Specialist at RONGHE
Best Value Best value for money, low cost, stability and reliability, as well as the most comprehensive ecosystem of parts and accessories.
Robotics Control Board PCBA for Motion Control and Automation
Compact robot joints demand more than just a smaller PCB. They require high-performance motion control, precise motor drive, reliable power management and high-density PCBA integration. This custom servo control PCBA is built around the HPMicro HPM6E8Y high-performance RISC-V MCU, integrating motion control, power electronics and real-time communication capabilities into a compact platform.
4218 High Torque BLDC Motor for UAV Applications
High-torque 4218 brushless motor designed for UAVs, robotics and other high-load applications, delivering strong thrust, stable operation and efficient power output.

From Engineering to Manufacturing. Built for Reliability. We turn electronic designs into reliable, production-ready control systems.

RONGHE integrates engineering support, component sourcing, PCB assembly, programming, testing and final assembly into one streamlined manufacturing platform. From UAV flight controllers and robotic control boards to smart home, industrial and power electronics, we support customers from prototype and pilot runs to scalable mass production.

Request a Custom PCBA Quote

Share your Gerber files, BOM, drawings or project requirements with RONGHE. Our engineering and manufacturing team will review your project and provide a customized quotation based on your specifications, quantity and production requirements. Your design files will be handled confidentially.
First Name*
Last Name*
Company Name
Phone/Whatsapp
Business Email *
Project Requirements
Estimated Order Quantity (pcs)*
Image Upload
Upload product photos or reference images
File Upload
Upload Gerber, BOM, Pick & Place, or other project files

Frequently Asked Questions

Common questions about custom control board and PCBA manufacturing.

What files do I need for a PCBA quotation?

Please provide your Gerber files, BOM and Pick & Place files. Schematics, firmware and testing requirements are also recommended if programming or functional testing is required.

Can you build prototypes before mass production?

Yes. RONGHE supports prototype builds for design and functional verification, followed by pilot runs before volume production when required.

Can RONGHE source components according to my BOM?

Yes. We provide BOM-based component sourcing and can assist with component availability, lead times and alternative parts. Any proposed substitutions are submitted for customer approval before production.

Do you provide programming and functional testing?

Yes. Firmware programming and functional testing can be integrated into the PCBA manufacturing process according to your project requirements and test procedures.

Can you manufacture control boards based on our existing design?

Yes. If your design is production-ready, you can provide Gerber, BOM, Pick & Place and related technical files for manufacturing review. DFM feedback can also be provided before production when necessary.

Can you support pilot runs before volume production?

Yes. Pilot runs can be used to verify the manufacturing process, testing procedures and product consistency before scaling to larger production quantities.

What is the minimum order quantity for custom PCBA?

MOQ depends on the PCB design, component requirements and manufacturing process. We support prototype and small-batch production before moving to pilot runs and mass production.

What types of control boards does RONGHE manufacture?

RONGHE manufactures custom control boards and PCBAs for robotics, UAVs, smart home and IoT devices, industrial automation, power electronics and other embedded systems.